Extractors WireLine Rod Friction Grip

Our range of WireLine Rod Friction Grip Recovery tools has been designed to recover WireLine Rods without the damage that conversational Rod Taps inflict on the thin wall tubing or internal threads. It consists of an expanding spring type collet arrangement of which was introduced into the WireLine Rod and when activated by turning a small part of a revolution it grips the inside bore of the Rod securely. Then by turning it in the opposite direction it will release the grip.

WireLine Rod Friction Grip - Drillwell Ltd

The special spring type gripping fingers are hard surfaced with tungsten carbide grit for maximum friction grip. This type of recovery tool can be used to recover right hand rods or left handed rods.

Flushing of the borehole maybe continued whilst using the WireLine Rod Friction Grip extractor tool. Please note that these recovery tools are not designed to be rotated and should not be subject to excessive torque. The pull that can be applied for each size are listed and controlled by shear pins fitted in the lowering coupling.

WireLine Rod Friction Grip Extractors – Part Numbers

Designation AQ BQ NQ HQ GEOBOR P
Rod Thread AW Box BW Box NW Box HW Box NW Box
Part No. DW 07600 DW 07601 DW 07602 DW 07603 DW 07604
Max. Pull. Lb. 9200 13000 20000 30000 30000
Max. Pull. Kg. 4180 5900 9000 13600 13600

All our WireLine Rod Friction Grip products are designed and manufactured in house by our fully qualified engineers allowing us to provide a custom service and a fast turn around.

If you require any further information or a bespoke design then please email or contact us.